Skip to content
 |  Tyco Electronics Segment Indicator  |   | 
Tyco Electronics - Our commitment. Your advantage.
Visit www.tycoelectronics.com Raychem Circuit Protection Products
Home > Fuses > Fast Acting Fuses

Raychem Fast Acting Fuses

Fast-acting Surface-mount Fuse

Fast-acting fuses help provide overcurrent protection on systems using DC power sources up to 63VDC. The fuse's monolithic, multilayer design provides the highest hold current in the smallest footprint, reduces diffusion-related aging, improves product reliability and resilience, and enhances high temperature performance in a wide range of circuit protection designs. This helps facilitate the development of more reliable, high-performance consumer electronics such as laptops, multimedia devices, cell phones, and other portable electronics.

Fuse Selection Guide (pdf 416KB) Download Datasheet (pdf 318KB)
Order Samples
Tech Fundamentals (pdf 101KB)

Product Series RoHS Compliant 0402SFF 0603SFF 1206SFF
Form Factor (inches) 0402 0603 1206
Primary Section
Fuses
Fuses
Fuses
Max Interrupt Voltage
24V
24V, 32V
24V, 32V, 63V
Max Rated Current
0.5A to 4A
0.5A to 6A
0.5A to 8A
Max Interrupt Current
35A
35A, 50A
45A, 50A
Max Operating Temperature
125°C
125°C
125°C
Cold DCR (Nominal)
0.014Ω to 0.380Ω
0.010Ω to 0.485Ω
0.008Ω to 0.5Ω

RoHS Compliant All Fast Acting Fuses are RoHS Compliant

 

Clear Times at Rated Current
% of rated current Clear time at 25°C
100% 4 hours min.
250% 5 sec max.
400% 0.05 sec max.

 

Part Numbering System for Fast Acting Fuses

 

Agency Recognition for Fast Acting Fuses
Standard File Number
UL   E197536

Technical Guides

Definitions:
Cold DCR (Nominal)
DC resistance of fuse measured at 25°C.

All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Company's Standard Terms and Conditions of Sale for this product, and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes without notification to Buyer - to materials or processing that do not affect compliance with any applicable specification.